Owner Modifications - Redwood Owners Group Forum

SeeLevel II tank monitor

RomanyLife — Fri, 03 Apr 2020 23:33:49 +0000

Finished installing my new SeeLevel II tank sensors! Working great... easy to do using existing sensor wiring. No more always FULL black tank readings. If you want to do this... make sure you check your tank sizes prior to ordering, as there are different sensor size options. Garnet Instruments allows you to mix sensor sizes when ordering. Also, if you have a black tank (and one grey) shaped like mine with a rim, the sensor needs to be applied to the end opposite the outflow where it is flat. 2297

Lippert Tilt Bed System

Jim — Sun, 09 Jun 2019 01:00:55 +0000

Hello all, I am in the process of acquiring all the needed parts to allow me to self install the Lippert tilt bed system.... Has anyone taken on this task themselves? Joe

adjustable bed

Jim — Mon, 13 May 2019 03:19:14 +0000

Has anyone put in an adjustable bed frame? The type that allows you to raise your head to read, or watch TV.. the 2019's have them, we were told the 2020's had them... Our 2020 does not and now I am trying to figure out my options...That was HUGE for my wife.

NEW 17.5 rims/tires/center caps and lugnuts

Jim — Tue, 07 May 2019 04:49:22 +0000

I do not have pictures yet, but when I pick up the new Redwood next week, I will be removing the brand new wheel assemblies and tires, AND THE SPARE, and replacing them with new Rims and Goodyear G114's... The tires will have about 700 miles on them, I will post pictures one I take receipt of the trailer... I have offices up and down the East Coast and can arrange for them to be at the closest one for your pick up.... Joe If anyone is interested, drop me a line

batteries

Jim — Sun, 28 Apr 2019 05:47:00 +0000

2 years ago I replaced my aging coach batteries with 2 group 31 Lifeline AGM batteries... I want to Take them out of the coach before the salvage guy comes and takes it away. Anyone have a good, CHEAP battery suggestion that they could give me... Should I put 2 in or just 1 ?? The adjuster told me that if I upgraded anything, I could remove that item, as long as the original was put back.... It came with 2 junk deep cell batts..

Lost the Redwood today

Jim — Sat, 20 Apr 2019 21:42:00 +0000

Light Switch labels

Jim — Thu, 28 Mar 2019 20:18:26 +0000

While cleaning and sorting all the "stuff" in the coach (amazing how much it accumulates while fulltime) I found a packet of the Light switch labels that I made up in past years when we came to the Rallys. These are peel and stick labels for all the switches that have 2 or more in the panel. I got tired very quickly of hitting one switch after another to find the light I wanted. LOL At the time I owned a Sign and Graphics company so made these up. Disclaimer ~ these are, as they say in the car world ~ NOS, New Old Stock. I also no longer own the company so when they're gone - they're gone. They were accurate for the models of Redwood through 2016 model year. The FL may or may not be accurate even that far as the model changed frequently. If you have an FL, I'll send you one, but understand that all the labels may not be right. If you would like a set, there is no charge. Simply send me a PM with your name and mailing address and I'll send you a set. Quantities are limited so first come first served. Here's what I have ~ 36RL 36FB 36FL (only have 3 ) 38GK 38RL 39MB Have a great day !!

Adding Insulation to Front Cap

Jim — Mon, 24 Dec 2018 21:33:47 +0000

Question for any of you that have done it - my project in the next couple of days is to pull the front closet apart and put a bunch of insulation in there. Will one roll of 6" batt insulation do it or do I need two ? 2013 36 RL Thanks all and have a Great Christmas !!

Cabinet Door Strut

Jim — Thu, 22 Nov 2018 04:40:21 +0000

The cabinet door above the microwave in our 2015 39MB is a horizontal hinged door. There was nothing to hold the door open while taking things out or putting things in the cupboard making it very hard. We installed this inexpensive cabinet door strut which we had seen in another manufacturers RV. Very easy to install and works great. 562,563

euro spring bed

Jim — Thu, 08 Nov 2018 18:33:16 +0000

I looked around here and haven't found anything on this one yet. I have a 2012 36RL, with the euro spring bed. I'm not sure if the original mattress has been replaced, but looking at the overhang at the foot, it looks like a short queen may have been originally installed at the factory and replaced with a standard queen. What I want to know is, has anyone removed the euro springs under their mattress? Those things bounce around like a water bed, and we neither one like that. I'm assuming that a plywood base sized to fit the mattress needs to be installed for proper support?