Notifications
Clear all
Topic starter
x
Posted : August 27, 2017 5:34 PM
Topic starter
x
Posted : August 27, 2017 5:48 PM
Topic starter
x
Posted : August 27, 2017 5:52 PM
Topic starter
The 12VDC from the battery system is essentially not adjustable. I would check the 12VDC at the Wingard amp. The amp's output is also not adjustable. Checking the incoming OTA signal strength via one of your TV' "setup" screens could be helpful. If low, and adjusting the antenna position does not increase the signal then that is the limit for the existing OTA antenna.
Posted : August 27, 2017 5:56 PM
Page 2 / 2
Prev
