Forum

Water and cable con...
 
Notifications
Clear all

Water and cable connections

8 Posts
4 Users
0 Reactions
804 Views
(@Anonymous)
Posts: 0
New Member
 

Not sure how this site works. We just bought a new 2018 3401RL Redwood 5th wheel. They cable connections in the outside compartment are not labeled I have no idea what port to plug our portable G3 satellite into. Also 3 of the 4 water connections are labeled the 4 is not. I can’t find anything telling me what that 4 port does. Any help is greatly appreciated.

 
Posted : October 4, 2018 10:46 AM
Danny_and_Linda
(@danny_and_linda)
Posts: 884
Prominent Member
 

Pictures would help.
As to how this site works, you did it. You ask questions & there will be several do their very best to answer & likewise if you have an answer just jump right in there to help.

Travelin' Texans
Former '13 FB owner
Currently rvless!!

 
Posted : October 4, 2018 11:34 AM
(@Anonymous)
Posts: 0
New Member
 

Hi Everyone,

I am interested in knowing the answer myself. That way I can put labels above the connections.

Al

 
Posted : October 5, 2018 8:05 AM
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
 

As Danny mentioned, many of us need photos to be able to assist. Lots of us still have older 2012/2013 models and Redwood have made some significant changes.

However, with photos we can probably work it out.

For the cable connections, many of us bought signal tracers, as even if they were labelled, it wasn't correct.

 
Posted : October 5, 2018 9:52 AM
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
 

on my "16" the connections were not marked either. I went to Home Depot and purchased a signal tracer like stated above.

It turned out that the top Right was Bedroom... and the top Left was Living Room..

 
Posted : October 5, 2018 11:35 AM
(@Anonymous)
Posts: 0
New Member
 

Thanks to those of you responding. I will take pictures and post. I did find behind the curved carpeted wall in the main storage access to plumbing and cables. I need to remove some screws and climb in to check it out.

 
Posted : October 8, 2018 9:26 AM
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
 

When you pull the panel off, use heavy duty Velcro to re-attach it. I guarantee you will be going back in there again. I used Velcro back in 2014, and the wall has stayed in place.

 
Posted : October 8, 2018 9:21 PM
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
 

I put an aluminum track on the floor and ceiling for the cover. Slides into the space nicely with no curve. Also 3" velcro keeps it in place nicely. As others have commented you'll be in and out this area frequently so go the velcro route.

 
Posted : October 9, 2018 1:34 PM
Share: