My 2013 36RL has had a rain leak that rotted out the Bed room floor. I had it replaced (they removed it) & now it keeps sticking going out or coming in. I have to keep hitting the switch back & forth 10-15 times to get all the way. The repair facility can't seem to figure it out. Any causes or solutions you all can come up with?
Marlindy
R. Lindemuth
I have a 2013 38BR and had the same issues with a leak requiring a new bedroom floor. Have the same issues with the slide motors on mine from time to time. The issue is that your slide motors are out of sync. To fix this you need to cycle the slide in and out each time it stops... BUT when you do... you need to hold the slide button in the IN or OUT position for a count of 5 Mississippi AFTER the slide stops moving. This should reset both motors. I had to do this about 5 times to get the slide to fully open or close. I now do this EVERY time I use the bedroom slide.
Good Luck.
