I have a 2014 RW36FB Redwood 5th wheel with a LCI auto leveling system. Went to charge up the batteries today and hook it up, but the display is not coming on at all. Plenty of power. I tried disconnecting and reconnecting the power to the panel. Nothing. I tried the manual override (lights flashed in the back), but again, nothing. Suggestions? Thanks much. Brad
Brad, I recommend resetting all power ... turn off or unplug shore power, turn the battery and power disconnect buttons over the batteries all for at least a minute. then turn it all back on and then check the circuit breaker panel too. Many times a breaker can pop and not look tripped. Turn them off and then back on anyway, and then reset all GCFI breakers in each bathroom/kitchen and if any outside. if nothing seems too work then this last one is a bit crazy but worth the try as it is set up as a direct power connection, but plug your RV into the truck with the break/lights cable with the engine running and see if that will do the trick ... good luck
