Forum

Notifications
Clear all

parts list for hard wireing amall compressor

3 Posts
2 Users
0 Reactions
957 Views
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
Topic starter
 

This one is for Brad - AKA Atom Ant .

Can you tell me a parts list of what you needed to put the small compressor on the pin box?

Joe

 
Posted : July 18, 2017 4:55 PM
(@Anonymous)
Posts: 0
New Member
 

Sorry for the delay, here is a dup of what I posted on the other forum:

Joe,
I probably had a combination of things on mine I had removed from old trucks I sold, but this kit is does it all:

air lift shock control

I originally didn't have a gauge. I had the compressor up in the pin box itself (mounts right to the wood flooring up there and powered it from the pin box electrical (battery charge wire). The kit has tubing with the 90 degree elbow and fitting that goes to your shraeder valve on top of the bag.

I took the momentary switch and deflator valve and installed them near where my docking light switch was so I could operate them without leaning over the dually fender.

Later on I found the gauge and added it and installed an air chuck and momentary switch to turn on the guage light, but none of that is needed.

Ultimately, the Wireless One would have been how I would do it next time, as it allows me to adjust from truck cab and maintains pressure at my setting. With my set up if you wanted to adjust it you had to jump out. I always the wireless one would work great on air springs too.

wireless one

 
Posted : July 21, 2017 10:15 AM
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
Topic starter
 

Thanks Brad,

I forgot that I posted that on here also.. I did act on the response from the other site.. I found that the cheapest online is at Amazon ( with Prime) it is $127.92 with free shipping.. I now have a job to do once I return from vacation . .

Joe

 
Posted : July 21, 2017 11:22 AM
Share: