Forum

Sleep Number Bed in...
 
Notifications
Clear all

Sleep Number Bed in 3901WB

3 Posts
1 Users
0 Reactions
704 Views
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
Topic starter
 

Has anyone put a Sleep Number bed in a current 3901WB or MB? Just wondered if anybody figured out how to put 110V power under the bed for the pump. The slide moves the bed and its enclosure about 24" so I'm stuck as to the best way to get power to the pump. I can always just plug the cord into the 110V outlet next to the bed but I will have to add that to the list of things to remember to unplug. Any ideas would be appreciated.

 
Posted : June 4, 2018 7:05 PM
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
Topic starter
 

We bought two power strips with longer cords, one for each side of the bed. Have a clock, electric mattress pad and pump plugged into one, and just clock and mattress pad into the other.
On travel days, we just un-plug when we get up, but with the long cord won't hurt if we forget.
I guess if you pulled the plywood you could try and fish an AC line in with the 12V line to the slide motor, just haven't tried.

 
Posted : June 5, 2018 11:23 AM
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
Topic starter
 

I had my dealer add a receptacle inside the storage area where the foldable chairs are. Then I drilled holes to route the air lines for the bed. Very slick, works great.

 
Posted : June 5, 2018 9:22 PM
Share: