I'm sure I can figure it out with a little investigation but thought I would ask here. Today when I went to auto level the panel as always says "grounding jacks" Well... the front jacks grounded but would not stop and eventually blew the breakers behind the battery. Manual mode and all other functions seem to work fine so my guess without investigating is a pressure sensor???
Anyone run into this?
Steve
Steve, You could be right on that. You could call Lippert Components at 574-537-8900 and see if they know a few possibilities.
Chris 2012 36RL
Ended up be a simple fix but not sure which of the two fixed it. Called LCI and as always they gave me the basic answers but in this case it worked. It was about 1" low on fluid so I filled it to the 1/4" below filler as they said and then reset the 0 calibration in case it lost it's memory.
All fixed..... I thought I was going to have to buy the brain box.
Steve
That's great news Steve!! I like a happy endings . . .