Forum

Notifications
Clear all

Rebound clamp spring replacement

3 Posts
1 Users
0 Reactions
463 Views
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
Topic starter
 

I have a rebound clamp that has come loose and allowed the springs to become mis-aligned with each other. I have the axle jacked up and the weight off the springs. What is the best way to get the springs back aligned together?

 
Posted : September 21, 2019 10:17 AM
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
Topic starter
 

You would think that the weight of the trailer off the axles that a couple of good strong C clamps would do the truck. Should be able to tap the rebound clamp back in place once lined up. Clamping the leafs together should allow that to happen. Worth a try.

 
Posted : September 21, 2019 11:57 AM
Jim
 Jim
(@j_a_wolfe)
Posts: 10846
Member
Topic starter
 

I have a rebound clamp that has come loose and allowed the springs to become mis-aligned with each other. I have the axle jacked up and the weight off the springs. What is the best way to get the springs back aligned together?

I used 2 or 3 heavy duty C-clamps on one of my springs to hold and reform the the rebound clamp on the spring bundle after it was nearly straightened out due to rough interstate around Birmingham 4 years ago. It has held its shape okay since then.

 
Posted : September 21, 2019 5:02 PM
Share: